Horizontal machining center refers to the machining center where the table and the spindle are arranged in parallel. The horizontal machining center usually has three linear motion axes plus one table rotary axis. The horizontal machining center can automatically select different tools according to the program after clamping the workpiece at one time, automatically change the rotation speed of the spindle, and complete the processing of multiple processes on multiple surfaces in sequence. The machining center is most suitable for machining the cabinet. Class parts. Next, I will introduce the four main points of attention in using the horizontal machining center.
1. Installation of the horizontal machining center environment
Horizontal machining centers should be installed away from sources, away from direct sunlight, without heat radiation and without moisture. If there is a source near the place where the horizontal machining center is installed, a shockproof groove should be placed around the horizontal machining center. If the anti-shock is not provided, it will directly affect the processing accuracy and stability of the horizontal machining center. Over time, it will affect the poor contact of the electronic components, and the failure will affect the reliability of the horizontal machining center.
2. Strict control of voltage and current
Horizontal machining centers are generally installed in the processing workshop, and there are many mechanical equipments in the processing workshop, which inevitably leads to large fluctuations in the power grid. Therefore, the position of the horizontal machining center must strictly control the voltage and current of the power supply. It is necessary to control the voltage and current of the power supply within the allowable range of the horizontal machining center. It is necessary to keep the voltage and current of the power supply stable, otherwise it will directly affect the lying. The normal operation of the machining center.
3. Temperature and humidity will directly affect the horizontal machining center
Horizontal machining centers generally need to be in an environment below 30 degrees Celsius to work properly. Generally, exhaust fans and air coolers are installed in the distribution box of the horizontal machining center to ensure that the electronic components and the central processing are working under constant temperature. . If the temperature and humidity are too high, the component life of the control system will decrease, resulting in an increase in the failure of the horizontal machining center. When the humidity is increased, the dust will increase on the integrated circuit board and directly lead to failure of contact and short circuit.
4. Machine factory parameter setting
When using the horizontal machining center, the customer can’t change the factory parameter setting of the machine at will, because these factory parameter settings are directly related to the dynamic characteristics of each part of the horizontal machining center. Only the gap compensation parameter value can be set according to the actual situation. If you want to change the factory setting parameters, please contact the manufacturer and change the factory parameter settings under the guidance of the manufacturer’s technician.