Possible test failures of CNC vertical lathe

CNC Vertical lathe

The CNC vertical lathe is mainly used for processing large and heavy workpieces with large diameter and short length and workpieces that are not easy to be clamped on the horizontal lathe. When the swing diameter is satisfied, the workpieces that are too heavy are not easy to be clamped in the sleeper. The machining accuracy has an impact, and the above problem can be solved by using a vertical lathe.

What are the general problems in the process of CNC vertical lathe test?

The test failures of CNC vertical vehicles generally have the following:

  1. Hot

That is, the temperature rises too fast, so that the temperature value exceeds the maximum limit of the specified value, and even a bad phenomenon such as smoking occurs.

  1. Vibration

It means that the vibration amplitude of the fuselage and its moving parts exceeds the specified allowable range and becomes abnormal.

  1. Abnormal sound

Abnormal sound refers to the impact sound, friction sound or impact sound inside the vertical lathe.

  1. Crawling and impact movement

It mainly appears on the guide rail of the sliding friction surface, mainly when the movement speed is slow, fast, or short-term stop and sudden advance. The speed is uneven and there is no regularity.

  1. Gear disintegration

The main reason is that the metal breaks the sound and the transmission part produces a periodic abnormal sound.

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment

Share this news with others

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on email
Email
Share on print
Print

News Category

Recent News

Register Our Newsletter

Meekare will only send you e-mail when we have updated news, will not send you e-mail at any other time.