Bullhead Planing Machine

Bullhead Planing Machine is mainly used for the plane, forming surface and groove on small and medium-sized workpieces in single-piece small batch production.

It is a planer for linear reciprocating motion. The ram has a planer and is named after the turret at the front end of the ram is shaped like a bull’s head.

Details About Bullhead Planing Machine

The main movement of the machine mainly using the small and medium-sized bullhead planer is mostly driven by the crank rocker mechanism, so the moving speed of the ram is not uniform.

Large-scale bullhead planers are mostly hydraulic planer, hydraulically driven, and the ram is basically moving at a constant speed. Planes, forming faces and grooves on small and medium-sized workpieces in a single batch.

 

Technical Parameters:

ModelUnitB635A
Max planing lengthmm350
Max distance from ram bottom to worktable surfacemm330
Max worktable transverse moving distance mm400
Max worktable vertical moving distance mm270
Max distance from planer to bed front guide surface mm550
Max ram displacementmm170
Max worktable swing angle (Without vise)°±90
Max worktable swing angle (With vise)°±55
Max tool holder vertical travelmm110
Ram reciprocation times per minutetimes/Min32,50,80,125
Worktable feed per ram reciprocating When wheel is one tooth (vertical)mm0.18
When wheel is one tooth (horizontal)mm0.21
When wheel is four teeth (vertical)mm0.73
When wheel is four teeth (horizontal)mm0.84
Motorkw, r/Min1.5, 1400
Dimensionmm1530*930*1370
Weightkg1000

As our company continuously developing and improving our products, the specification parameters might change without any notice.

 

Share Bullhead Planing Machine With Others

Share on facebook
Facebook
Share on linkedin
LinkedIn
Share on twitter
Twitter
Share on email
Email