Mechanical Radial Drill

Mechanical radial drill can be used for drilling, reaming, reaming, tapping and scraping end faces.

Details About Mechanical Radial Drill

The mechanical radial drilling machine is mainly consists of the base, the inner column, the outer column, the rocker arm, the headstock and the table. The inner column is fixed at one end of the base, and the outer column is sleeved on the outer side, the outer column can be rotated 360 degrees around the inner column, and the mechanical rocker drilling machine is mechanically tightened, mechanically fed, and mechanically locked.

 

Technical Parameters:

ModelUnitZ3040*12/1Z3032*10/1
Max drilling dia.mm4035
Distance from spindle end to base worktablemm260-1100140-1100
Distance from spindle center to column generating linemm360-1300360-1000
Spindle travelmm220/280200
Spindle taperMT4MT4
Spindle rotation speed ranger/Min28-120075-1220
Spindle speed steps126
Spindle feed rangemm/r0.10-0.250.10, 0.16, 0.25
Spindle feed steps63
Rocker arm swing angle°360360
Main motor powerkw32.2
Lift motor powerkw1.10.75
Weightkg15001100/1200
Dimension (L*W*H)mm1600*700*20501500*705*2050

 

As our company continuously developing and improving our products, the specification parameters might change without any notice.

Photos Of Mechanical Radial Drill

Share Mechanical Radial Drill With Others

Share on facebook
Facebook
Share on linkedin
LinkedIn
Share on twitter
Twitter
Share on email
Email