Sawing machine use specifications:

1. Band sawing machine operation and maintenance personnel must undergo professional training to master the operation and maintenance skills. Workers should ensure adequate sleep and maintain concentration.
2. When changing speed, must stop the machine and then open the protective cover, turn the handle to loosen the belt, place the V-belt in the slot of required speed, then tension the belt and cover the protective cover.
3. The adjustment of chip removal wire brush should make the wire contact the tooth part of band saw blade, but do not exceed the root of tooth. Pay attention to whether the wire brush can remove the iron filings.
4. Adjust the guide arm along the dovetail guide according to the size of the workpiece to be machined. After the adjustment, the guide device must be locked.
5. Sawing material diameter must not exceed the specified value, and workpiece must be firmly clamped.
6. The band saw blade’s tightness should be appropriate, and speed and feed rate must be appropriate.
7. Cast iron, copper, aluminum parts without cutting liquid, other material need to add cutting liquid.
8. If the saw blade breaks during the sawing process, after replacing the new saw blade, the workpiece must be turned over and re-sawed. When putting down the saw bow, should be slow and must not be impacted.
9. The operator is strictly forbidden to leave the post during the sawing process. It is strictly forbidden to operate with gloves.
10. When each shift is off work, the power must be cut off, open the protective cover, clear the chips that are brought around the saw wheel, do routine maintenance and cleaning around.